Translations:WB-MCM8 Modbus Count Inputs/39/en
General principle of operation
Indication
В модуле есть индикаторы, которые помогут определить его состояние без подключения к контроллеру:
- S — статус обмена по Modbus: загорается при подаче низковольтного питания на модуль и мигает в момент опроса по шине RS-485. В устройствах с включенными событиями Быстрого Modbus ⚡ индикатор мигает более часто чем при стандартном опросе по очереди, так как опрос событий происходит быстрее. В режиме загрузчика редко мигает. При загрузке новой прошивки перестает менять свое состояние.
- 1–7 — status of inputs: lit — input is closed. There is no indicator for the eighth entry.
Inputs
The WB-MCM8 inputs work on the principle of "dry contact" - shorting the input to ground ignd causes the input to work. There is an indication of the status of inputs from 1 to 8 and the status of the device on the front cover.
When a pulse arrives at the WB-MCM8 input, the corresponding LED lights up, the value of the input state changes, and the value of the counter of operations of this input increases. The values of all operation counters are recorded in the non-volatile memory of the device. The number of counters is 32 bits.