Translations:Using Wiren Board with pulsed output devices/5/en
Next, in the web interface, you must configure universal input A1 as a counter. In the Configs menu, select GPIO Driver Configuration. On the panel choose A1_IN login settings, click Properties and mark all the checkboxes. Then click Properties again. Now there are additional fields in the A1_IN input properties.
In the list of fields Pulse counter type (if any) choose the type water_meter. In the field Number of pulses per unit (kWh or m^3) specify how many pulses per cubic meter (for example, if 1 pulse of the counter corresponds to 10 liters, then specify 100; if 1 liter — 1000.) Field value Number of decimal places... specifies how many decimal places will be displayed in the Wiren Board interface. Save the settings by clicking the Save button at the top of the page and go to the list of devices on the Devices page.
Find the device Discrete I/O and see that it has new properties: "A1_IN_current" and "A1_IN_total". The field "A1_IN_current" shows the current water consumption, and "A1_IN_total" — what amount was spent from the moment of connection. In mqtt, these fields correspond to the topics /devices/wb-gpio/controls/A1_IN_current and /devices/wb-gpio/controls/A1_IN_total.