WB-MGE Modbus-Ethernet Interface Converter/en: различия между версиями

Часть переводимой страницы WB-MGE.
(Новая страница: «On the default Ethernet network, WB-MGE has a static IP address of 192.168.0.7. '''Attention''': if the local network uses a range of addresses other than 192.168…»)
(Часть переводимой страницы WB-MGE.)
 
(не показаны 3 промежуточные версии 2 участников)
Строка 118: Строка 118:
On the default Ethernet network, WB-MGE has a static IP address of 192.168.0.7. '''Attention''': if the local network uses a range of addresses other than 192.168.0.0/24, then when connecting through the router '''communication with the device will disappear''' and additional configuration will be required. Detailed instructions on configuring the Ethernet part of WB-MGE can be found on [[WB-MIO-E_AND_WB-MGE_Ethernet_Connection_Setup/en|configuring Ethenet interfaces and connecting WB-MIO-E and WB-MGE modules]].
On the default Ethernet network, WB-MGE has a static IP address of 192.168.0.7. '''Attention''': if the local network uses a range of addresses other than 192.168.0.0/24, then when connecting through the router '''communication with the device will disappear''' and additional configuration will be required. Detailed instructions on configuring the Ethernet part of WB-MGE can be found on [[WB-MIO-E_AND_WB-MGE_Ethernet_Connection_Setup/en|configuring Ethenet interfaces and connecting WB-MIO-E and WB-MGE modules]].


==Modbus-регистры==
==The Modbus-registers==
Описание регистров можно найти на странице [[WB-MIO#Управление по Modbus|Преобразователи интерфейсов WB-MIO и WB-MIO-E]] в разделе "Управление по Modbus".
A description of the registers can be found on [[WB-MIO/en#Modbus Control|WB-MIO and WB-MIO-E interface Converters]] in the "Modbus Control" section.


== Изображения и чертежи устройства ==
== Images and drawings of the device ==
<!--{{Wbincludes:WBPicturesNoDrawing|1}}-->
<!--{{Wbincludes:WBPicturesNoDrawing|1}}-->
{{Wbincludes:WBPictures|1}}
{{Wbincludes:WBPictures|1}}
wb_editors
14 355

правок